Replacing your ETM? Some Tips from an ETM Manufacturer
It’s has been over a year since we have introduced the Non – Contacting ETM upgrade. The purpose of this post is to make all of you Do It Yourselfers aware of the potential issues and problems that others like you have come across during their own ETM installation. We hope you find this information helpful.
1. ETM Installed backwards – Yes, it is possible to install the unit with a label facing the engine.
Symptoms: Rough idle, engine will not rev up past 2500 RPM.
Corrective action: ETM must be installed with the label facing the radiator.
2. The old ETM gasket not removed and left stuck to the intake manifold.
Symptoms: Irregular idle, misfire on acceleration. Possible MAF and ETM related DTC stored.
Corrective action: Our units are shipped with a new gasket; ensure that the old gasket is removed.
3. Disturbance to the Turbo Pressure Sensor (One of the two or three sensors located on the intake pipe).
Tips and Hints for XeMODeX ETM Installation
The post Tips and Hints for XeMODeX ETM Installation appeared first on Matthews Volvo Site.